Diesel & Petrol Engine Hydraulic Power Pack
We are Mega Industrial Equip & Machines Manufacturing LLC the largest Manufacturer of Diesel engine / Petrol Engine / Electric Power hydraulic power unit manufacturing for Marine Applications ZONE-II certified unit and supplying spare parts as well like Starter, Filters, Engine, pressure relief valves, piston pump, vane pump, gear pump, Engine Accessories, Tank, etc…
Diesel Engine Hydraulic power unit is often used in Marine/construction / agricultural applications where electric power is not available at the site. Diesel-hydraulic units offer a versatile and portable power source for these applications.
The Diesel-hydraulic power packs can be delivered with an ATEX certificate offshore applications. This is necessary when you are pumping in potentially explosive environments. Our power packs are available in various designs and with several capacities from low flow rate to high flow rate & Low pressure to High-pressure Units. The Diesel Engine power pack is built with necessary components with a Hose Basket as well.
Diesel Engine hydraulic units may have several Electrical or Manual Directional control valves that allow the operator to direct the flow of hydraulic fluid to the various components of the system. The control valves may be operated manually or Electrical control panel. Electrical directional valves can be used in this unit except Zone II application
Specification of Diesel Engine / Petrol Engine HYDRAULIC POWER UNIT The Diesel Engine driven power unit has a Hydraulic Piston Pump /Gear Pump or Vane Pump with a flow output of 6 LPM to 400LPM @1800 RPM with a maximum pressure of 4350 PSI to achieve the cylinders raise & lower operations under designed load conditions.
Specification of Diesel Engine / Petrol Engine HYDRAULIC POWER UNIT The engine Capacity has a minimum rating of 5HP to Max. 173HP with water or air-cooled engine which is from Deutz, JCB, or FPT engines.
The power unit consists of the following items:
• Painted or Sandblasting with Powder coated structural skid
• Engine – Petrol or Diesel
• Electrical Motor
• Pump
• Hydraulic tank with all accessories
• Diesel reservoir with all accessories
• Pilot-operated relief valve for controlling the max pressure of the system.
• Control Panel with control for accelerator, pressure gauge, Temperature gauge, Tachometer, Oil Pressure gauge, Emergency Engine shut down knob, Engine Control & Monitoring unit & controlling the engine parameters during operation.
• Power source: Starter
• All metal components are grit blasted, primed with two-pack epoxy primer, and finished with heavy-duty, two-pack epoxy polyamine industrial coatings.
Mega Industrial Equipment is the stockiest / Distributor of CONTARINI Hydraulic components, CAPRONI, OMT, B&C HYDRAULICS, M+S HYDRAULICS,
POLY-HYDRON, WINNER HYDRAULICS, HYDROLINE PRODUCTS which will be used in this Diesel Engine hydraulic power unit.
Available Options:
• Custom-designed unit suitable for specific required capacity and Applications
• Proportional or non-proportional directional control valve with pressure relief valve
• Air blast oil cooler / Hydraulic Motor driven fan of electric motor
• Fully lockable cabinet
• Power isolation lockout switch,
• Soft starter (electric motor)
• Bunded base.
• Custom-designed hydraulic manifold to suit a range of actuators,
• Wireless pendant control.
Mega Industrial Equipments making all our diesel engine Hydraulic power units comes with 12-month warranty from the invoice date, to ensure that your system component will enjoy a long and productive lifetime
Diesel Engine
Petrol Engine
