Hydraulic Accumulator Suppliers in Dubai UAE
Hydraulic accumulator mostly installed in hydraulic systems to store energy in the form of fluid when under pressure and to smooth out pulsations. Typically, a hydraulic system with an accumulator can use a low flow pump because the accumulator stores energy from the pump during periods of low demand. This energy is available for immediate use, released upon demand at a rate many times greater than what could be supplied by the pump alone. Also our Hydraulic accumulator safety blocks include shut-off and discharge valves to separate the accumulator from the hydraulic system for maintenance or in an emergency.
Our hydraulic accumulator models offer high & low-pressure variants depending on the application requirements and our lightweight diaphragm hydraulic accumulators are ideal for industries where space and weight are important factors. All of these devices are available with a broad selection of configurations and are easy to install. In UAE we are the best supplier for quality design and our device guarantees optimal performance and service life.
We are the leading Hydraulic Manufacture and Supplier in UAE. Contact us for more details and prices for our Hydraulic Products.
Accumulator Manufacturers in Dubai UAE
Bladder Accumulator
Specification
- Maximum working pressure (PS): 350-480-690 bar
- Test Pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: forged steel, sand, and painted
- Standard nitrogen valve: ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Standard bladder: can be used with mineral
- Oils and non-corrosive fluids
- Installation: horizontal / vertical (nitrogen valve upward)
Diaphragm Accumulator Supplier in UAE
Specification
- Maximum working pressure (PS): 250 bar
- Test pressure (PT): PS x 1,43 / 1,3 / 1,5
- Construction method: carbon steel body with caulking, without welds, not repairable/not disassemble; piston in aluminum
- Standard nitrogen valve: ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Seals: standard execution in NBR
- Installation: in every position
Piston Accumulator Manufacturer in Dubai
Specification
- Maximum working pressure (PS): 300 bar
- Test pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: made in painted carbon steel
- Standard nitrogen valve: ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Standard diaphragm: can be used with mineral oils and non-corrosive fluids
- Installation: horizontal / vertical (nitrogen valve upward)
FAQ
Does Mega Ind Equipments provide customised accumulators?
Yes, we provide customized solutions for specific applications, pressures, and volumes. Contact our team for a complete solution tailored to your requirements.
Can You Provide Installation Service?
Yes, we provide installation service for all our products across the UAE that ensure smooth integration and operation.
Where are you located in UAE?
Our Head office is located in Sharja and all our service in across the UAE
What are the industries you are supplied the accumulator?
We supplied wide range of industries like oil & gas, construction, manufacturing, mining, power generation in across the UAE.
Do you provide accumulators with warranties?
Yes. Our accumulators come with warranties based on the application and requirements, typically ranging from 6 to 12 months.
How do I know which type of accumulator is right for me?
Contact us — our experienced engineering team will assess your hydraulic system and recommend the accumulator type best suited to your application.
Do you offer delivery services across the UAE?
Yes, Mega Ind Equipment’s provides prompt and reliable delivery services throughout the UAE, including Dubai, Abu Dhabi, Sharjah, and all major industrial zones.
What types of hydraulic accumulators do you supply?
Bladder accumulators, diaphragm accumulators, and piston accumulators, each suited to different pressure ranges, installation orientations, and space requirements.
What pressure ratings do your bladder accumulators support?
Maximum working pressure of 350, 480, or 690 bar depending on model, with a forged steel body and a working temperature range of -20°C to +80°C.
What pressure rating do your diaphragm accumulators support?
A maximum working pressure of 250 bar, with a carbon steel body and aluminum piston, and standard NBR seals — installable in any orientation.
What pressure rating do your piston accumulators support?
A maximum working pressure of 300 bar, with a painted carbon steel body, installable horizontally or vertically with the nitrogen valve facing upward.
Why would I choose a diaphragm accumulator over a bladder or piston type?
Diaphragm accumulators are lightweight and can be installed in any orientation, making them ideal where space and weight are limited — bladder and piston types suit higher-pressure applications but require specific installation orientations.
What is a hydraulic accumulator used for?
It stores energy from a hydraulic pump as pressurized fluid, allowing a lower-flow pump to be used since stored energy is released on demand at a rate far greater than the pump alone could supply — it also smooths out pressure pulsations in the system.
Do your accumulators include safety features?
Yes. Our accumulator safety blocks include shut-off and discharge valves that isolate the accumulator from the rest of the hydraulic system for maintenance or in an emergency.
What fluids are compatible with your hydraulic accumulators?
Standard bladders, diaphragms, and pistons are designed for use with mineral oils and other non-corrosive fluids.